1. 四川文理学院化学与化学工程系
2. 四川文理学院“特色植物开发研究”四川省高校重点实验室
扫 描 看 全 文
黄小梅, 邓祥, 吴狄, 等. 核-壳结构TiO2@Pt复合纳米颗粒修饰的葡萄糖生物传感器[J]. 分析测试学报, 2014,33(3):313-317.
Amperometric Glucose Biosensor based on Assembly of Core/Shell Structure nano-TiO2@Pt Composite[J]. 2014,33(3):313-317.
制备了核-壳结构的TiO2@Pt复合纳米颗粒,并修饰于恒电位沉积的普鲁士蓝-壳聚糖(PB-CS)杂化膜表面,以固定葡萄糖氧化酶。由于TiO2@Pt复合纳米颗粒的引入显著增大了传感器的导电性和酶的固载量,同时CS的掺杂,防止了PB的泄露,使得传感器对葡萄糖具有较好的催化作用。该传感器在1.2×10-6 ~1.1×10-3 mol?L-1范围内,响应电流与葡萄糖浓度呈良好的线性,相关系数(r)为0.998 6,检出限(S/N=3)达到4.0×10-7 mol?L-1,灵敏度为13.31 mA?mol?L-1?cm-2。对0.3 mmol?L-1的葡萄糖标准溶液连续检测5次,其相对标准偏差为3.8%。
Prussian blue and chitosan(PB-CS) composite film was prepared by potentiostatic deposition.Core/shell structure nano-TiO2@Pt composite was prepared and deposited on the surface of PB-CS composite film,which was utilized to immobilize glucose oxidase(GOD).nano-TiO2@Pt composite could obviously improve electrical conductivity of biosensor and amount of immobilized GOx.Furthermore,CS can effectively protect PB from leaking out,which could increase the catalytic activity of this biosensor.This novel glucose biosensor shows a good linear relationship with glucose concentration in the range of 1.2×10-6-1.1×10-3 mol?L-1 with a correlation coefficient(r) of 0.998 6.The limit of detection is 4.0×10-7 mol?L-1 and the sensitivity is 13.31 mA?mol?L-1?cm-2.The relative standard deviation for the method was 3.8% at concentration level of 0.3 mmol?L-1 glucose standard solution for 5 determinations.
普鲁士蓝(PB)壳聚糖(CS)TiO2@Pt复合纳米颗粒葡萄糖氧化酶
Prussian blue(PB)chitosan(CS)nano-TiO2@Pt compositeglucose oxidase(GOD)
0
浏览量
854
下载量
4
CSCD
关联资源
相关文章
相关作者
相关机构