Adsorption Performance and Mechanism of Ni based Nitrogen doped Magnetic Multi wall Carbon Nanotubes for Bisphenol A

您当前的位置：

首页 >

文章列表页 >

Adsorption Performance and Mechanism of Ni based Nitrogen doped Magnetic Multi wall Carbon Nanotubes for Bisphenol A

更新时间：2023-04-18

- Adsorption Performance and Mechanism of Ni based Nitrogen doped Magnetic Multi wall Carbon Nanotubes for Bisphenol A
- Vol. 40, Issue 3, Pages: 340-346(2021)
- 作者机构：
  
  1. 苏州科技大学环境科学与工程学院
  2. ,河南,郑州,450011
  3. 江苏省环境科学与工程重点实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC：
扫描看全文
Adsorption Performance and Mechanism of Ni based Nitrogen doped Magnetic Multi wall Carbon Nanotubes for Bisphenol A. [J]. 40(3):340-346(2021)
DOI：

Adsorption Performance and Mechanism of Ni based Nitrogen doped Magnetic Multi wall Carbon Nanotubes for Bisphenol A. [J]. 40(3):340-346(2021) DOI：

摘要

通过简单的高温煅烧法制备了具有较大比表面积的磁性镍基氮掺杂多壁碳纳米管材料(Ni-NMCNTs)，将该材料用于双酚A(BPA)的吸附研究，对材料吸附前后的形貌和结构变化进行表征，探究其吸附机理。结果表明：具有中空管状结构的磁性Ni-NMCNTs对BPA具有良好的吸附能力和重复利用性，材料中吡啶氮的存在提供了吸附缺陷位且增强了π-π共轭作用，为提高吸附性能奠定了基础。实验发现酸性条件下更有利于Ni-NMCNTs 对BPA的吸附，在室温25 ℃，投加量20 mg，pH 60条件下，最大吸附容量可达8364 mg/g，15 min内BPA的吸附率可达868%。吸附过程符合准二级动力学方程和Freundlich吸附等温线模型，热力学参数表明整个过程自发进行。

Abstract

A kind of magnetic Ni based N doped multi walled carbon nanotubes(Ni-NMCNTs),with large specific surface area,were prepared by high temperature calcination.The morphology and structural changes of the material before and after adsorption were characterized,and its adsorption mechanism was further explored.Results showed that this magnetic Ni-NMCNTs with hollow tubular structure exhibited good adsorption capacity and reusability for BPA,and the presence of pyridine nitrogen in the material provided adsorption defect sites and enhanced π-π conjugation,which layed the foundation for improving adsorption performance.Experiments showed that acidic conditions are more conducive to the adsorption of BPA by Ni-NMCNTs.At ambient 25 ℃ conditions,the maximum adsorption capacity could reach 8364 mg/g and the adsorption percentage of BPA could reach up to 868%in 15 min when the dosage was 20 mg and pH value was 60.The adsorption process was in general agreement with the pseudo second order kinetic equation and Freundlich adsorption isotherm model.The thermodynamic parameters demonstrated that the whole adsorption process was spontaneous.

关键词

双酚A磁性氮掺杂多壁碳纳米管吸附动力学重复利用吸附机理

Keywords

bisphenol Amagnetic Ni based nitrogen doped multi wall carbon nanotubesadsorption kineticsrecyclingadsorption mechanism

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Electrochemical Behavior and Determination of Bisphenol A at ZnO-MWCNTs Composite Modified Electrodes in the Presence of CTAB

Simultaneous Determination of Bisphenol A,Octylphenol and Nonylphenol in Skin Care Cosmetics by Liquid Chromatography-Tandem Mass Spectrometry

Voltammetric Detection of Bisphenol A Mediated by［Fe（phen）3］2+ in SDS-Ethanol-Water System

Determination of Benzo(a)pyrene and Bisphenol A in Drinking Water by Solid Phase Extraction/High Performance Liquid Chromatography

Study of Bisphenol A Determination Using Aptamer Sensor with Polythionine as Electrochemical Probe and Immobilization Matrix

Related Author

No data

Related Institution

南京晓庄学院生物化工与环境工程学院

广州市质量监督检测研究院国家化妆品质量监督检验中心

华南师范大学化学与环境学院

湖南省疾病预防控制中心

华东交通大学理学院

Address：100 Xianlie Middle Road, Guangzhou Postal code：510070
Tel：020-87684776,37656606 Fax：020-87684776 Email：fxcsxb@china.com
Technical support is provided by Beijing Founder electronics co., LTD 粤ICP备12017312号-3 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰