A fluorescent analytical method for the detection of trace Fe2+ and Fe3+ in water was established using ellagic acid(EA) as fluorescent probe.The effects of common metal ions,methanol concentration and pH value of media on the quantitative detection of Fe2+ or Fe3+ were investigated in detail.Results illustrated that a good linear relationship between the flourescence quenching and the concentrations of Fe2+ and Fe3+ was obtained within the range of 0.08-1.1 μmol/L with the detection limits of 72 nmol/L and 63 nmol/L,respectively.Meanwhile,Fe2+ could be detected accurately without significant interference using 10 mmol/L ammonium tartrate to mask Fe3+.In addition,the Job's plot analysis showed that the coordination ratios for EA to Fe2+ or Fe3+ were 1∶3 and 1∶2,respectively.The established method was used in the detection of Fe2+ and Fe3+ in tap water and Zhujiang River water with average recoveries of 81.0%-116%.
Dual Detection of Cr(VI) and Hg(II) by Fluorescent Carbon Dots Based on Polyester-Cotton Blended Fabrics
Advances in Responsive Fluorescent Probes for Detecting Neurotransmitters
Application of Fluorescent Probes in Protein Phosphorylation and Glycosylation Detection
Related Author
No data
Related Institution
Department of Chemistry and Chemical Engineering,Hubei Key Laboratory of Biomass Fibers and Eco-dyeing & Finishing,Wuhan Textile University
Hubei Key Laboratory of Novel Reactor and Green Chemical Technology,Wuhan Institute of Technology
CAS Key Laboratory of Coastal Environmental Processes and Ecological Remediation,Shandong Research Center for Coastal Environmental Engineering and Technology,Yantai Institute of Coastal Zone Research,Chinese Academy of Sciences
College of Chemistry and Chemical Engineering,Yantai University